Techical Data Sheet 

GREEN UP LR (Limescale Remover)

 

Description

Lime scale is the hard, off-white, chalky deposit found in kettles, hot-water boilers and the inside of inadequately

maintained hot-water central heating systems. It is also often found as a similar deposit on the inner surface of old

pipes and other surfaces where "hard water" has evaporated. Other than being unsightly and harder to clean,

lime scale seriously impairs the operation or damages various components.

​

GREEN UP- LR is descaling agent, used to remove lime scale from metal surfaces in contact with hot water, such as in boilers, water heaters, and kettles.     Strongly acidic descaling agents are often corrosive the eyes and skin.

GREEN UP- LR Based on Green Up technology, provides corrosion protection in aqueous solutions for all kind of metals, including aluminum, iron, copper and solder alloys, and offers excel-lent cavitation protection. It is effective against

a wide range of micro organisms including Gram positive/negative bacteria and fungi

GREEN UP- LR  is a natural  preservative/conservative Active water based environmentally friendly , contains

no caustic soda, breaks down quickly does not harm humans and the environment

​

Summary of Benefits

• Highly efficient in dissolving scales

• Does not contain dissolving agents which are carbon based

• Composed of material which is user friendly

• Not dangerous for users

• Suitable for use in industrial cooling systems  areas

• Food safe

• Not harm the environmentIs, biodegradable

• Non flammable

• Can be diluted with water

• Can be applied in wet areas

• Reduce cooling system failures 

• Environmentally friendly

• Money Saved

 

Application  

• Cleaning kitchen equipment

• Cleaning water pipe system

• Cleaning stainless steel surfaces

• Cleaning industrial cooler equipment

• Cleaning motors and cars cooling system

• Cleaning industrial water heating machinery

• Cleaning water filters, pipes and water tanks

• Cleaning all kinds of scales in cooling systems

• Prevents the formation of molds, fungus in water systems

 

Directions for Use

Cleaning  lime scale in water boilers - recommended to add GREEN UP LR in concentration of 10% to the boiler

system and have it circulate for 5-7 hours. Then replace the water from the heating system with clean water.

On a regular working basis it is recommended to add GREEN UP LR at 2% to heating system to prevent scale

formation in water.
To clean cooling systems - add GREEN UP LR at 5 % volume.  GREEN UP LR performs as a flushing fluid to clean cooling systems that were filled with other inhibitor products. In most cases it is required to flush the system twice.

For a good result it is important that the engine has reached normal operating temperatures and all

thermo-valves are opened.

GREEN UP-LR  can also be used as an inhibitor for central heating systems.
GREEN UP–LR used for for glass cleaning, a solution with a 10% concentration of GREEN UP LR will remove hard

water stains from glass without scrubbing.

 

Application  

Flushing is done preferably with  Green Up LR in fresh water. Using Green Up LR for flushing will facilitate the

removal of the deposits and provide corrosion protection during and after the flushing operations.

In older systems, hard water scale, corrosion deposits and precipitates from former water treatment chemicals

will not be removed by flushing WITH WATER only. Depending on the nature and amount of the deposits it will be necessary to operate the equipment for some time to allow cleaning of the system with GREEN UP-LR solution

​

Cleaning  lime scale in water boilers

Recommended to adding GREEN UP LR in concentration of 10%to  the boiler system and make a spin for 5-7 hours,

then pour the water from the heating system and fill clean water.

On regular working recommended add of GREEN UP LR at 2% to heating  system to prevent scale formation in water.

​

 Flushing Procedure for Cooling Systems 

Completely drain the system.

In most cases it is required to flush the system twice with clean water.

Fill the system with 5% solution of Green Up LR in fresh water (flushing fluid).

This is performs  as a flushing fluid to clean cooling systems, that were filled with other inhibitor packages.

Run the equipment in  NORMAL speed or operate the engine in service for at least one hour WITH the

flushing solution   

Completely drain the system .

Flush the system twice with clean water.

​

After finishing treatment of GREEN UP- LR  Fill the system with a   7–10% Green Up Cool solution in fresh water

and maintain in service between 6% and 10%.

(See instruction on the technical page of Green Up Cool)

​

For a good result it is important that the engine has reached normal operating temperatures and all thermo-valves

are opened.

Concentration of Green Up Cool should periodically be checked by means of a Refractometer.

​

GREEN UP- LR  can also be applied as an inhibitor package for central heating systems.

GREEN UP- LR For glass cleaning, a solution with a 10% concentration of GREEN UP-LR will remove hard

water stains from glass without scrubbing

 
Economics

The outstanding corrosion protection and low additive depletion results in less maintenance and repair costs.
 
Composition
This product is water based and contains a mixture of ingredients which are safe for use.

None of the ingredients are made from animals or animal products.

Safety Precautions

Do not ingest this product.

Avoid contact with eyes. In case of eye contact, rinse well with a large quantity of clean water,

flush for a minimum of 15 minutes.

In case of swallowing, drink a large amount of water or milk and seek medical attention.

Keep away from children.

Keep the container in a closed shaded area.

Avoid exposure to extremely high temperature.

 

Physical Properties

 

Appearance                                              Clear colorless  liquid
Density                                                      1.02

Flash Point                                                 None 

Solubility in water                                       Immiscible

pH @ 5% DILUTION                                  3-4
Colour                                                        Pale Colored

Odour                                                        Barely perceptible odour

Flammability                                              None

Flammable Boiling Temperature/ range ->100 C

​

Health and Safety

For full Health and Safety data please refer to our specific MSDS Sheet, which is available upon request.
 
 Pack  Sizes

4 liters,18 liters, 205 liter barrels, 1000 liter canister